Wood Plastic Composited Product Making
Pangunahing ginagamit ng PVC / WPC profile extrusion line ang PVC o UPVC o PVC+wood powder sa extruder profile tulad ng partition ng gusali, cabinet, door panel, window sill, skirting board, door edgeline, door jamb, window shutters, photo frame, mirror frame, banding gilid ng kasangkapan, frame ng pinto, bulsa ng pinto, bulsa ng bintana, profile ng column, handrail ng hagdan, floor board, panel ng cladding ng dekorasyon, muwebles, WPC pipe, atbp. Craft Flowing Chart
PANGUNAHING TEKNIKAL NA PARAMETER:
| Uri | YF180 | YF240 | YF300 |
| Vacuum degree (mapa) | -0.08~-0.09 | -0.08~-0.09 | -0.08~-0.09 |
| Gitnang distansya ng T type dies mounting groove (mm) | 320 | 320 | 460 |
| Taas ng die mounting base (mm) | 890~1100 | 890~1100 | 890~1100 |
| Ilipat ang distansya ng vacuum forming machine (mm) | 5000 | 6000 | 6000 |
| Bilis ng paghakot (m/min) | 0.3~7.8 | 0.1~5 | 0.1~5 |
| Lakas ng paghakot (kN) | 7.5 | 30 | 35 |
| Epektibong haba ng paghakot (mm) | 1.2 | 1.8 | 1.8 |
| Lapad ng hawak na bolck (mm) | 180 | 240 | 300 |
| Pedrail open degree (mm) | 110 | 140 | 160 |
| Sawing linear veiocity (m/s) | 58.6 | 58.6 | 58.6 |
| Max Saeable na seksyon (mm) | 180*65 | 240*65 | 300*80 |
Conical twin screw extruder
• Sikat sa mundong brand ng electrical component tulad ng Siemens, Schneider, ABB atbp;• Mataas na torque gearbox na may nagpapatibay ng NSK/SKF bearing;• Ang orihinal na motor ng Siemens/WEG ay nakamit sa buong mundo pagkatapos ng serbisyo;• Bimetallic turnilyo at bariles;• Intelligent PLC controlling system na may interface na madaling gamitin sa tao.
>> Para sa paggawa ng malambot na profile ng PVC, matibay na profile ng PVC, soft-hard co-extrusion profile, foam profile extrusion, multi-layer co-extrusion atbp.
>>Daloy ng Proseso:Screw Loader →cone / parallel Twin Screw Extruder/Single screw extruder → Co-extrusion machine → Mould → Calibration Table → Haul-off at Cutter → Tripping Table → Final Product Inspecting & Packing
>>Mga ekstrang bahagi
| SJZ65/132 Concial twin screw extruder | Qty. | |
| 1 | Mercury temperatura meter 0-300 ℃ | 4 na mga PC |
| 2 | Mataas na temperatura na cable | 20m |
| 3 | screw-axial adjusted washer | 1 set |
| 4 | Thermo-couple | 5 pcs |
| 5 | Heater ng Pinagsamang core | 1 piraso |
| 6 | Potensyomiter | 1 piraso |
| 7 | Oil seal ng high-speed shaft | 1 piraso |
| YF240 extrusion accessory | Qty. | |
| 1 | ￠8 T-type na adaptor | 3 pcs |
| 2 | Ball valve model A,B | 5pcs/bawat isa |
| 3 | ￠8 Gas pipe | 30m |
| 4 | Limit switch | 2 pcs |
| 5 | Mabilis na pagbabago ng adaptor | 10 pcs |
| 6 | Solenoid valve | 1 piraso |
| Iba pang parte | Qty | |
| 1 | Cinqueofoil axial linker | 1 piraso |
| 2 | Speed meter para sa drawing unit | 1 piraso |
| 3 | Terminal adapter | 2 pcs |
| 4 | 2-posisyon 5-port solenoid valve | 2 pcs |
| 5 | One-way na balbula ng throttle | 2 pcs |
